This is the latest recevied telemetry packets stored in our database for station/object DL8GAK-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791389413 | 27.7 C | 39.21 % | 943.13 hPa | 0 | 0 |
| 1791388844 | 27.9 C | 41.16 % | 1009.75 hPa | 0 | 0 |
| 1791388796 | 27.9 C | 41.16 % | 1013.38 hPa | 0 | 0 |
| 1791388769 | 27.6 C | 41.48 % | 1013.75 hPa | 0 | 0 |
| 1791388752 | 27.6 C | 41.48 % | 1014 hPa | 0 | 0 |
| 1791388735 | 27.6 C | 41.48 % | 1014.38 hPa | 0 | 0 |
| 1791388718 | 27.2 C | 42.03 % | 1013.38 hPa | 0 | 0 |
| 1791388694 | 27.2 C | 42.03 % | 1014.25 hPa | 0 | 0 |
| 1791388677 | 27.2 C | 42.03 % | 1014.25 hPa | 0 | 0 |
| 1791388660 | 26.9 C | 42.01 % | 1014 hPa | 0 | 0 |
| 1791388643 | 26.9 C | 42.01 % | 1014.25 hPa | 0 | 0 |
| 1791388619 | 26.9 C | 42.01 % | 1013.75 hPa | 0 | 0 |
| 1791388601 | 26.8 C | 42.36 % | 1015.75 hPa | 0 | 0 |
| 1791388577 | 26.8 C | 42.36 % | 1015.75 hPa | 0 | 0 |
| 1791388541 | 26.8 C | 42.36 % | 938.25 hPa | 0 | 0 |
| 1791388455 | 26.5 C | 42.44 % | 1015.63 hPa | 0 | 0 |
| 1791388432 | 26.1 C | 42.77 % | 1015.13 hPa | 0 | 0 |
| 1791388414 | 26.1 C | 42.77 % | 1015.25 hPa | 0 | 0 |
| 1791388397 | 26.1 C | 42.77 % | 1015.5 hPa | 0 | 0 |
| 1791388369 | 25.8 C | 42.96 % | 1015.75 hPa | 0 | 0 |
| 1791388352 | 25.8 C | 42.96 % | 1015.63 hPa | 0 | 0 |
| 1791388335 | 25.8 C | 42.96 % | 1014.25 hPa | 0 | 0 |
| 1791388319 | 25.6 C | 42.89 % | 1014.75 hPa | 0 | 0 |
| 1791388284 | 25.6 C | 42.89 % | 939.25 hPa | 0 | 0 |
| 1791376295 | 32.6 C | 32.93 % | 1017.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)