EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

PINAL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PINAL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	V_Ext*	RX_rate*	RelRate*	DrpRate*
1791450461	4.28 VDC	13.12 VDC	732 pkt/h	90 pkt/h	642 pkt/h
1791449860	4.28 VDC	13.14 VDC	714 pkt/h	96 pkt/h	618 pkt/h
1791449260	4.28 VDC	13.14 VDC	762 pkt/h	90 pkt/h	672 pkt/h
1791448660	4.28 VDC	13.14 VDC	786 pkt/h	108 pkt/h	678 pkt/h
1791448060	4.28 VDC	13.14 VDC	744 pkt/h	96 pkt/h	648 pkt/h
1791447460	4.28 VDC	13.14 VDC	810 pkt/h	108 pkt/h	702 pkt/h
1791446859	4.28 VDC	13.14 VDC	726 pkt/h	114 pkt/h	612 pkt/h
1791446259	4.27 VDC	13.14 VDC	912 pkt/h	126 pkt/h	786 pkt/h
1791445659	4.28 VDC	13.14 VDC	738 pkt/h	102 pkt/h	636 pkt/h
1791445058	4.28 VDC	13.14 VDC	798 pkt/h	120 pkt/h	678 pkt/h
1791444458	4.28 VDC	13.14 VDC	732 pkt/h	90 pkt/h	642 pkt/h
1791443858	4.27 VDC	13.14 VDC	852 pkt/h	126 pkt/h	726 pkt/h
1791443261	4.28 VDC	13.14 VDC	707 pkt/h	94 pkt/h	613 pkt/h
1791442647	4.27 VDC	13.12 VDC	0 pkt/h	0 pkt/h	0 pkt/h
1791442065	4.28 VDC	13.14 VDC	756 pkt/h	102 pkt/h	654 pkt/h
1791441465	4.28 VDC	13.14 VDC	792 pkt/h	120 pkt/h	672 pkt/h
1791440865	4.28 VDC	13.14 VDC	636 pkt/h	102 pkt/h	534 pkt/h
1791440264	4.28 VDC	13.14 VDC	786 pkt/h	132 pkt/h	654 pkt/h
1791439664	4.28 VDC	13.14 VDC	840 pkt/h	96 pkt/h	744 pkt/h
1791439064	4.28 VDC	13.14 VDC	756 pkt/h	120 pkt/h	636 pkt/h
1791438463	4.28 VDC	13.14 VDC	798 pkt/h	120 pkt/h	678 pkt/h
1791437863	4.28 VDC	13.14 VDC	720 pkt/h	96 pkt/h	624 pkt/h
1791437263	4.28 VDC	13.14 VDC	726 pkt/h	144 pkt/h	582 pkt/h
1791436663	4.28 VDC	13.14 VDC	762 pkt/h	108 pkt/h	654 pkt/h
1791436063	4.28 VDC	13.14 VDC	756 pkt/h	102 pkt/h	654 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

V_Ext: 0, 0.02, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)