This is the latest recevied telemetry packets stored in our database for station/object G0TJH-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791454266 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1791453066 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1791451865 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1791450665 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1791449465 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1791448264 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1791447064 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1791445864 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1791444664 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1791443463 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1791442263 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1791441063 | 2.39 VDC | 0 | 0 | 0 | 0 |
| 1791439863 | 1.01 VDC | 0 | 0 | 0 | 0 |
| 1791438662 | 1.02 VDC | 0 | 0 | 0 | 0 |
| 1791437462 | 1.07 VDC | 0 | 0 | 0 | 0 |
| 1791436262 | 1.09 VDC | 0 | 0 | 0 | 0 |
| 1791435062 | 1.12 VDC | 0 | 0 | 0 | 0 |
| 1791433861 | 1.12 VDC | 0 | 0 | 0 | 0 |
| 1791432661 | 1.14 VDC | 0 | 0 | 0 | 0 |
| 1791431461 | 1.18 VDC | 0 | 0 | 0 | 0 |
| 1791430261 | 1.21 VDC | 0 | 0 | 0 | 0 |
| 1791429061 | 1.24 VDC | 0 | 0 | 0 | 0 |
| 1791427860 | 1.27 VDC | 0 | 0 | 0 | 0 |
| 1791426660 | 1.32 VDC | 0 | 0 | 0 | 0 |
| 1791425460 | 1.34 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)