This is the latest recevied telemetry packets stored in our database for station/object YB1CHAN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795359522 | 32 °C | 90 %RH | 0 | 0 | 0 |
| 1795357745 | 33 °C | 90 %RH | 0 | 0 | 0 |
| 1795355968 | 32 °C | 92 %RH | 0 | 0 | 0 |
| 1795354191 | 33 °C | 91 %RH | 0 | 0 | 0 |
| 1795352414 | 33 °C | 88 %RH | 0 | 0 | 0 |
| 1795350637 | 33 °C | 90 %RH | 0 | 0 | 0 |
| 1795348860 | 33 °C | 87 %RH | 0 | 0 | 0 |
| 1795347083 | 33 °C | 88 %RH | 0 | 0 | 0 |
| 1795345306 | 34 °C | 82 %RH | 0 | 0 | 0 |
| 1795343529 | 34 °C | 77 %RH | 0 | 0 | 0 |
| 1795341752 | 34 °C | 77 %RH | 0 | 0 | 0 |
| 1795339975 | 34 °C | 78 %RH | 0 | 0 | 0 |
| 1795338198 | 35 °C | 73 %RH | 0 | 0 | 0 |
| 1795336421 | 35 °C | 72 %RH | 0 | 0 | 0 |
| 1795335989 | 35 °C | 69 %RH | 0 | 0 | 0 |
| 1795334212 | 36 °C | 68 %RH | 0 | 0 | 0 |
| 1795332437 | 36 °C | 65 %RH | 0 | 0 | 0 |
| 1795330658 | 35 °C | 66 %RH | 0 | 0 | 0 |
| 1795328881 | 35 °C | 68 %RH | 0 | 0 | 0 |
| 1795327105 | 34 °C | 71 %RH | 0 | 0 | 0 |
| 1795325328 | 35 °C | 70 %RH | 0 | 0 | 0 |
| 1795323550 | 33 °C | 77 %RH | 0 | 0 | 0 |
| 1795321774 | 33 °C | 81 %RH | 0 | 0 | 0 |
| 1795319997 | 32 °C | 85 %RH | 0 | 0 | 0 |
| 1795318219 | 32 °C | 85 %RH | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)