This is the latest recevied telemetry packets stored in our database for station/object DL8GAK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787506677 | 33.8 | 29 | 1022.25 | 0 | 0 |
| 1787506653 | 33.8 | 29 | 1023 | 0 | 0 |
| 1787505593 | 34.2 | 30.4 | 1024.25 | 0 | 0 |
| 1787505307 | 34.3 | 29.9 | 1025 | 0 | 0 |
| 1787505244 | 34.3 | 29.53 | 1024.63 | 0 | 0 |
| 1787505216 | 34.3 | 30.17 | 1021.63 | 0 | 0 |
| 1787505111 | 34.3 | 30.06 | 1024.63 | 0 | 0 |
| 1787505064 | 34.3 | 29.75 | 1023.38 | 0 | 0 |
| 1787505040 | 34.3 | 29.75 | 1024.38 | 0 | 0 |
| 1787504360 | 34.9 | 30.37 | 1021.88 | 0 | 0 |
| 1787504263 | 34.9 | 29.65 | 1023.25 | 0 | 0 |
| 1787504228 | 34.9 | 29.5 | 1022.63 | 0 | 0 |
| 1787503878 | 35 | 30.63 | 1022.38 | 0 | 0 |
| 1787502974 | 35.2 | 29.87 | 1022.75 | 0 | 0 |
| 1787502070 | 35.3 | 30.03 | 1022.88 | 0 | 0 |
| 1787501166 | 35.4 | 30.19 | 1023.5 | 0 | 0 |
| 1787500262 | 35.3 | 31.4 | 1023.38 | 0 | 0 |
| 1787499358 | 35.2 | 31.25 | 1023.13 | 0 | 0 |
| 1787498286 | 35.6 | 31.72 | 1023.25 | 0 | 0 |
| 1787498228 | 35.6 | 31.75 | 1023 | 0 | 0 |
| 1787498174 | 35.6 | 32.04 | 1023 | 0 | 0 |
| 1787498126 | 35.6 | 32.28 | 1023.5 | 0 | 0 |
| 1787497896 | 35.6 | 32.46 | 1023.13 | 0 | 0 |
| 1787497822 | 35.5 | 32.6 | 1022.63 | 0 | 0 |
| 1787497798 | 35.5 | 32.6 | 1022 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)