This is the latest recevied telemetry packets stored in our database for station/object HB9IQZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787543485 | 0 Count | 289 Count | 0 Count | 0 VDC | 0 VDC |
| 1787541685 | 0 Count | 258 Count | 0 Count | 0 VDC | 0 VDC |
| 1787539885 | 0 Count | 228 Count | 0 Count | 0 VDC | 0 VDC |
| 1787538085 | 0 Count | 198 Count | 0 Count | 0 VDC | 0 VDC |
| 1787536285 | 0 Count | 167 Count | 0 Count | 0 VDC | 0 VDC |
| 1787534485 | 0 Count | 140 Count | 0 Count | 0 VDC | 0 VDC |
| 1787532685 | 0 Count | 107 Count | 0 Count | 0 VDC | 0 VDC |
| 1787530885 | 0 Count | 79 Count | 0 Count | 0 VDC | 0 VDC |
| 1787529085 | 0 Count | 54 Count | 0 Count | 0 VDC | 0 VDC |
| 1787527285 | 0 Count | 41 Count | 0 Count | 0 VDC | 0 VDC |
| 1787525485 | 0 Count | 25 Count | 0 Count | 0 VDC | 0 VDC |
| 1787523685 | 0 Count | 1016 Count | 0 Count | 0 VDC | 0 VDC |
| 1787521885 | 0 Count | 995 Count | 0 Count | 0 VDC | 0 VDC |
| 1787520085 | 0 Count | 970 Count | 0 Count | 0 VDC | 0 VDC |
| 1787518285 | 0 Count | 945 Count | 0 Count | 0 VDC | 0 VDC |
| 1787516485 | 0 Count | 925 Count | 0 Count | 0 VDC | 0 VDC |
| 1787514685 | 0 Count | 907 Count | 0 Count | 0 VDC | 0 VDC |
| 1787512885 | 0 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1787511085 | 0 Count | 879 Count | 0 Count | 0 VDC | 0 VDC |
| 1787509285 | 0 Count | 860 Count | 0 Count | 0 VDC | 0 VDC |
| 1787507485 | 0 Count | 847 Count | 0 Count | 0 VDC | 0 VDC |
| 1787505685 | 0 Count | 834 Count | 0 Count | 0 VDC | 0 VDC |
| 1787503885 | 0 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1787502085 | 0 Count | 784 Count | 0 Count | 0 VDC | 0 VDC |
| 1787500285 | 0 Count | 758 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)