This is the latest recevied telemetry packets stored in our database for station/object WD8ED-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787633717 | 5.37 VDC | 22.4 C | 1015 hPa | 0 | 0 |
| 1787632814 | 5.36 VDC | 22.7 C | 1015.5 hPa | 0 | 0 |
| 1787631911 | 5.36 VDC | 23.2 C | 1017 hPa | 0 | 0 |
| 1787631007 | 5.37 VDC | 23.4 C | 1016.88 hPa | 0 | 0 |
| 1787630104 | 5.35 VDC | 23.5 C | 1014.13 hPa | 0 | 0 |
| 1787629202 | 5.35 VDC | 23.8 C | 1017.88 hPa | 0 | 0 |
| 1787628299 | 5.36 VDC | 24 C | 1020 hPa | 0 | 0 |
| 1787627396 | 5.36 VDC | 24.3 C | 1016.13 hPa | 0 | 0 |
| 1787625590 | 5.36 VDC | 24.9 C | 1012.75 hPa | 0 | 0 |
| 1787624687 | 5.37 VDC | 25.2 C | 1015 hPa | 0 | 0 |
| 1787623784 | 5.36 VDC | 25.6 C | 1012.88 hPa | 0 | 0 |
| 1787622881 | 5.34 VDC | 25.8 C | 1016 hPa | 0 | 0 |
| 1787621977 | 5.35 VDC | 26.1 C | 1016.88 hPa | 0 | 0 |
| 1787621075 | 5.35 VDC | 26.4 C | 1011.13 hPa | 0 | 0 |
| 1787620172 | 5.35 VDC | 26.8 C | 1015.38 hPa | 0 | 0 |
| 1787619268 | 5.36 VDC | 27.1 C | 1020.13 hPa | 0 | 0 |
| 1787618366 | 5.36 VDC | 27.5 C | 1017.38 hPa | 0 | 0 |
| 1787617463 | 5.35 VDC | 27.9 C | 1012.75 hPa | 0 | 0 |
| 1787616560 | 5.36 VDC | 28.4 C | 1013.13 hPa | 0 | 0 |
| 1787615656 | 5.35 VDC | 29 C | 1014.63 hPa | 0 | 0 |
| 1787614754 | 5.36 VDC | 29.6 C | 1014 hPa | 0 | 0 |
| 1787613851 | 5.34 VDC | 30.7 C | 1012.25 hPa | 0 | 0 |
| 1787612948 | 5.34 VDC | 31.7 C | 1018.5 hPa | 0 | 0 |
| 1787612044 | 5.33 VDC | 33.8 C | 1019.25 hPa | 0 | 0 |
| 1787611142 | 5.35 VDC | 37 C | 1018.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)