This is the latest recevied telemetry packets stored in our database for station/object SP8SD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791457014 | 265 Count | 953 Count | 164 Count | 4.26 VDC | 0.14 VDC |
| 1791456113 | 248 Count | 891 Count | 150 Count | 4.23 VDC | 0.14 VDC |
| 1791455812 | 241 Count | 871 Count | 144 Count | 4.25 VDC | 0.14 VDC |
| 1791455512 | 234 Count | 844 Count | 138 Count | 4.2 VDC | 0.14 VDC |
| 1791455211 | 227 Count | 819 Count | 132 Count | 4.21 VDC | 0.14 VDC |
| 1791454910 | 226 Count | 806 Count | 132 Count | 4.22 VDC | 0.14 VDC |
| 1791454610 | 224 Count | 797 Count | 131 Count | 4.23 VDC | 0.14 VDC |
| 1791454309 | 222 Count | 795 Count | 130 Count | 4.23 VDC | 0.14 VDC |
| 1791454008 | 220 Count | 790 Count | 129 Count | 4.24 VDC | 0.14 VDC |
| 1791453726 | 215 Count | 777 Count | 126 Count | 4.22 VDC | 0.14 VDC |
| 1791453708 | 217 Count | 781 Count | 127 Count | 4.27 VDC | 0.14 VDC |
| 1791453407 | 215 Count | 777 Count | 126 Count | 4.22 VDC | 0.14 VDC |
| 1791453107 | 212 Count | 768 Count | 124 Count | 4.21 VDC | 0.14 VDC |
| 1791452806 | 209 Count | 755 Count | 122 Count | 4.19 VDC | 0.14 VDC |
| 1791452505 | 204 Count | 746 Count | 118 Count | 4.2 VDC | 0.14 VDC |
| 1791452384 | 177 Count | 663 Count | 105 Count | 4.23 VDC | 0.14 VDC |
| 1791452204 | 203 Count | 739 Count | 118 Count | 4.23 VDC | 0.14 VDC |
| 1791451904 | 200 Count | 733 Count | 116 Count | 4.26 VDC | 0.14 VDC |
| 1791451603 | 198 Count | 728 Count | 115 Count | 4.2 VDC | 0.14 VDC |
| 1791451302 | 197 Count | 722 Count | 115 Count | 4.25 VDC | 0.14 VDC |
| 1791451002 | 194 Count | 714 Count | 113 Count | 4.23 VDC | 0.14 VDC |
| 1791450701 | 193 Count | 710 Count | 113 Count | 4.22 VDC | 0.14 VDC |
| 1791450401 | 191 Count | 704 Count | 112 Count | 4.2 VDC | 0.14 VDC |
| 1791450100 | 188 Count | 696 Count | 110 Count | 4.27 VDC | 0.14 VDC |
| 1791449799 | 187 Count | 693 Count | 110 Count | 4.21 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)