This is the latest recevied telemetry packets stored in our database for station/object YD1BPG-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787560714 | 34 °C | 32 %RH | 919 hPa | 0 | 0 |
| 1787558739 | 34 °C | 33 %RH | 919 hPa | 0 | 0 |
| 1787556764 | 33 °C | 33 %RH | 919 hPa | 0 | 0 |
| 1787554789 | 33 °C | 32 %RH | 920 hPa | 0 | 0 |
| 1787552814 | 33 °C | 31 %RH | 920 hPa | 0 | 0 |
| 1787550839 | 33 °C | 32 %RH | 921 hPa | 0 | 0 |
| 1787548864 | 32 °C | 33 %RH | 921 hPa | 0 | 0 |
| 1787546889 | 32 °C | 33 %RH | 922 hPa | 0 | 0 |
| 1787544914 | 31 °C | 33 %RH | 922 hPa | 0 | 0 |
| 1787542939 | 31 °C | 34 %RH | 923 hPa | 0 | 0 |
| 1787540964 | 31 °C | 36 %RH | 923 hPa | 0 | 0 |
| 1787537014 | 30 °C | 38 %RH | 924 hPa | 0 | 0 |
| 1787535039 | 30 °C | 39 %RH | 924 hPa | 0 | 0 |
| 1787533064 | 30 °C | 38 %RH | 924 hPa | 0 | 0 |
| 1787531089 | 30 °C | 38 %RH | 923 hPa | 0 | 0 |
| 1787529114 | 30 °C | 38 %RH | 923 hPa | 0 | 0 |
| 1787527139 | 30 °C | 38 %RH | 923 hPa | 0 | 0 |
| 1787525164 | 30 °C | 38 %RH | 922 hPa | 0 | 0 |
| 1787523189 | 31 °C | 39 %RH | 922 hPa | 0 | 0 |
| 1787521214 | 31 °C | 39 %RH | 922 hPa | 0 | 0 |
| 1787519239 | 31 °C | 40 %RH | 922 hPa | 0 | 0 |
| 1787517264 | 31 °C | 40 %RH | 921 hPa | 0 | 0 |
| 1787515083 | 31 °C | 41 %RH | 921 hPa | 0 | 0 |
| 1787513108 | 31 °C | 41 %RH | 921 hPa | 0 | 0 |
| 1787511132 | 32 °C | 42 %RH | 922 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)