This is the latest recevied telemetry packets stored in our database for station/object SA7NOA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787533332 | 61 Count | 254 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787532429 | 60 Count | 249 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787531525 | 59 Count | 244 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787530622 | 58 Count | 239 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787529718 | 57 Count | 234 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787528815 | 56 Count | 229 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787527911 | 55 Count | 224 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787527008 | 54 Count | 220 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787526104 | 53 Count | 215 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787525200 | 52 Count | 210 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787524297 | 51 Count | 205 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787523393 | 50 Count | 200 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787522490 | 49 Count | 195 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787521586 | 48 Count | 190 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787520683 | 47 Count | 185 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787519779 | 46 Count | 180 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1787518876 | 45 Count | 176 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787517972 | 44 Count | 171 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1787517069 | 43 Count | 166 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1787515261 | 41 Count | 159 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1787514358 | 40 Count | 156 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1787513536 | 35 Count | 152 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1787512633 | 34 Count | 147 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1787511729 | 33 Count | 142 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1787510826 | 32 Count | 137 Count | 0 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)