This is the latest recevied telemetry packets stored in our database for station/object IR5AO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791453745 | 15.02 VDC | 0 | 0 | 0 | 0 |
| 1791451944 | 15.04 VDC | 0 | 0 | 0 | 0 |
| 1791450144 | 15.02 VDC | 0 | 0 | 0 | 0 |
| 1791448344 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1791446544 | 15.04 VDC | 0 | 0 | 0 | 0 |
| 1791444744 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1791442944 | 14.38 VDC | 0 | 0 | 0 | 0 |
| 1791441142 | 12.4 VDC | 0 | 0 | 0 | 0 |
| 1791439341 | 12.42 VDC | 0 | 0 | 0 | 0 |
| 1791437541 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1791435741 | 12.28 VDC | 0 | 0 | 0 | 0 |
| 1791433941 | 12.28 VDC | 0 | 0 | 0 | 0 |
| 1791432141 | 12.44 VDC | 0 | 0 | 0 | 0 |
| 1791430341 | 12.42 VDC | 0 | 0 | 0 | 0 |
| 1791428541 | 12.3 VDC | 0 | 0 | 0 | 0 |
| 1791426740 | 12.44 VDC | 0 | 0 | 0 | 0 |
| 1791424940 | 12.36 VDC | 0 | 0 | 0 | 0 |
| 1791423140 | 12.4 VDC | 0 | 0 | 0 | 0 |
| 1791421340 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1791419539 | 12.38 VDC | 0 | 0 | 0 | 0 |
| 1791417745 | 12.34 VDC | 0 | 0 | 0 | 0 |
| 1791415945 | 12.46 VDC | 0 | 0 | 0 | 0 |
| 1791414145 | 12.5 VDC | 0 | 0 | 0 | 0 |
| 1791412344 | 12.54 VDC | 0 | 0 | 0 | 0 |
| 1791410544 | 12.58 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)