This is the latest recevied telemetry packets stored in our database for station/object YC2SNK-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Hummidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783283399 | 33 °C | 41 %RH | 1001 hPa | 0 | 0 |
| 1783281599 | 33 °C | 40 %RH | 1001 hPa | 0 | 0 |
| 1783279799 | 33 °C | 42 %RH | 1001 hPa | 0 | 0 |
| 1783276199 | 34 °C | 41 %RH | 1001 hPa | 0 | 0 |
| 1783274399 | 34 °C | 41 %RH | 1001 hPa | 0 | 0 |
| 1783272599 | 34 °C | 40 %RH | 1001 hPa | 0 | 0 |
| 1783270799 | 34 °C | 39 %RH | 1001 hPa | 0 | 0 |
| 1783268999 | 34 °C | 37 %RH | 1001 hPa | 0 | 0 |
| 1783267199 | 33 °C | 45 %RH | 1001 hPa | 0 | 0 |
| 1783265399 | 33 °C | 46 %RH | 1001 hPa | 0 | 0 |
| 1783263599 | 34 °C | 45 %RH | 1001 hPa | 0 | 0 |
| 1783261799 | 33 °C | 45 %RH | 1001 hPa | 0 | 0 |
| 1783259999 | 34 °C | 44 %RH | 1001 hPa | 0 | 0 |
| 1783258199 | 34 °C | 42 %RH | 1001 hPa | 0 | 0 |
| 1783256399 | 34 °C | 42 %RH | 1001 hPa | 0 | 0 |
| 1783254599 | 34 °C | 41 %RH | 1001 hPa | 0 | 0 |
| 1783252799 | 35 °C | 40 %RH | 1000 hPa | 0 | 0 |
| 1783250999 | 35 °C | 38 %RH | 1000 hPa | 0 | 0 |
| 1783249199 | 35 °C | 33 %RH | 999 hPa | 0 | 0 |
| 1783247399 | 34 °C | 34 %RH | 999 hPa | 0 | 0 |
| 1783245599 | 35 °C | 34 %RH | 999 hPa | 0 | 0 |
| 1783243799 | 35 °C | 33 %RH | 998 hPa | 0 | 0 |
| 1783241999 | 35 °C | 32 %RH | 998 hPa | 0 | 0 |
| 1783240199 | 35 °C | 37 %RH | 998 hPa | 0 | 0 |
| 1783238399 | 36 °C | 37 %RH | 998 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Hummidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)