This is the latest recevied telemetry packets stored in our database for station/object YC1SNI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Voltage* | Current* | Value5* |
|---|---|---|---|---|---|
| 1787533121 | 28 °C | 69 %RH | 3 V | 110 mA | 0 |
| 1787531366 | 29 °C | 70 %RH | 3 V | 109 mA | 0 |
| 1787529611 | 29 °C | 68 %RH | 3 V | 126 mA | 0 |
| 1787527856 | 29 °C | 68 %RH | 3 V | 111 mA | 0 |
| 1787527842 | 29 °C | 68 %RH | 3 V | 111 mA | 0 |
| 1787527007 | 29 °C | 69 %RH | 3 V | 123 mA | 0 |
| 1787525252 | 29 °C | 69 %RH | 3 V | 113 mA | 0 |
| 1787523497 | 29 °C | 73 %RH | 3 V | 123 mA | 0 |
| 1787523483 | 29 °C | 73 %RH | 3 V | 108 mA | 0 |
| 1787521748 | 29 °C | 72 %RH | 3 V | 116 mA | 0 |
| 1787519993 | 29 °C | 72 %RH | 3 V | 156 mA | 0 |
| 1787518238 | 29 °C | 71 %RH | 3 V | 110 mA | 0 |
| 1787516483 | 29 °C | 71 %RH | 3 V | 107 mA | 0 |
| 1787514728 | 29 °C | 71 %RH | 3 V | 155 mA | 0 |
| 1787512973 | 29 °C | 70 %RH | 3 V | 105 mA | 0 |
| 1787511218 | 30 °C | 70 %RH | 3 V | 112 mA | 0 |
| 1787509463 | 30 °C | 69 %RH | 3 V | 109 mA | 0 |
| 1787509449 | 30 °C | 69 %RH | 3 V | 109 mA | 0 |
| 1787509434 | 30 °C | 69 %RH | 3 V | 159 mA | 0 |
| 1787508052 | 30 °C | 69 %RH | 3 V | 125 mA | 0 |
| 1787506297 | 30 °C | 68 %RH | 3 V | 109 mA | 0 |
| 1787504542 | 30 °C | 68 %RH | 3 V | 123 mA | 0 |
| 1787504528 | 30 °C | 68 %RH | 3 V | 107 mA | 0 |
| 1787503771 | 30 °C | 67 %RH | 4 V | 111 mA | 0 |
| 1787502016 | 30 °C | 67 %RH | 4 V | 125 mA | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Voltage: 0, 1, 0
Current: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)