This is the latest recevied telemetry packets stored in our database for station/object HS8AC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | VBAT* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787590667 | 25.79 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787590066 | 25.56 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1787589466 | 25.78 °C | 100 %RH | 4.21 V | 0 | 0 |
| 1787588866 | 25.89 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1787588266 | 25.95 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1787587666 | 26.02 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1787587066 | 25.97 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1787586466 | 26.03 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787585866 | 25.97 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787585266 | 25.99 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1787584666 | 25.65 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787584066 | 25.86 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1787583466 | 25.9 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1787582866 | 25.94 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787582266 | 25.48 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1787581666 | 25.96 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787581066 | 25.89 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787580466 | 25.82 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787579866 | 25.76 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1787579266 | 25.85 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787578666 | 25.79 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787578066 | 25.74 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1787577466 | 25.58 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1787576866 | 25.56 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1787576266 | 25.61 °C | 100 %RH | 4.2 V | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
VBAT: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)