EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

E23JWE-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E23JWE-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	VBAT*	CPU*
1787647978	4.04 V	33.79 °C
1787646941	4.04 V	32.79 °C
1787645914	4.02 V	33.79 °C
1787644878	4.04 V	32.79 °C
1787643847	4.04 V	31.79 °C
1787642813	4.04 V	30.79 °C
1787641781	4.03 V	30.79 °C
1787640750	4.02 V	28.79 °C
1787640717	4.04 V	31.79 °C
1787639650	4.04 V	29.79 °C
1787638617	4.02 V	31.79 °C
1787637583	4.02 V	31.79 °C
1787636549	4.04 V	27.79 °C
1787635516	4.02 V	28.79 °C
1787634486	4.03 V	28.79 °C
1787633457	4.02 V	31.79 °C
1787633446	4.02 V	31.79 °C
1787631359	4.04 V	39.79 °C
1787630321	4.04 V	39.79 °C
1787630265	4.04 V	39.79 °C
1787629228	4.04 V	37.79 °C
1787628197	4.04 V	35.79 °C
1787627164	4.06 V	37.79 °C
1787626127	4.04 V	35.79 °C
1787625096	4.04 V	35.79 °C

*Used Equation Coefficients:

VBAT: 0, 0.01, 0

CPU: 0, 0.01, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)