EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

HS8AS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS8AS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	VBAT *	CPU*
1787558681	27.79 °C	87.6 %RH	4.06 V	36.29 °C
1787558081	27.63 °C	86.4 %RH	4.06 V	36.29 °C
1787557481	28.06 °C	84.8 %RH	4.07 V	36.29 °C
1787556881	28.29 °C	85.3 %RH	4.07 V	37.29 °C
1787556281	27.48 °C	86.4 %RH	4.13 V	37.29 °C
1787555681	27.27 °C	85.5 %RH	4.12 V	37.29 °C
1787555081	27.59 °C	84.7 %RH	4.13 V	38.29 °C
1787554481	27.25 °C	88.1 %RH	4.13 V	37.29 °C
1787553881	27.59 °C	85.3 %RH	4.13 V	41.29 °C
1787553281	28.4 °C	82.4 %RH	4.15 V	45.29 °C
1787552681	27.4 °C	86 %RH	4.14 V	40.29 °C
1787552081	27.65 °C	83.1 %RH	4.13 V	38.29 °C
1787551481	27.37 °C	88.6 %RH	4.13 V	37.29 °C
1787550881	26.67 °C	88.4 %RH	4.09 V	35.29 °C
1787550281	26.81 °C	88.6 %RH	4.09 V	35.29 °C
1787549681	26.72 °C	87 %RH	4.09 V	35.29 °C
1787549081	26.77 °C	87.5 %RH	4.1 V	37.29 °C
1787548481	26.64 °C	89.2 %RH	4.08 V	36.29 °C
1787547881	27.14 °C	88.4 %RH	4.1 V	38.29 °C
1787547281	26.66 °C	88.2 %RH	4.13 V	35.29 °C
1787546681	26.51 °C	91.4 %RH	4.09 V	34.29 °C
1787546081	26.95 °C	89.1 %RH	4.06 V	34.29 °C
1787545481	27.62 °C	86.1 %RH	4.07 V	36.29 °C
1787544881	27.94 °C	83.2 %RH	4.06 V	37.29 °C
1787544281	27.41 °C	84.9 %RH	4.06 V	37.29 °C

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

VBAT : 0, 0.01, 0

CPU: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)