This is the latest recevied telemetry packets stored in our database for station/object SV3SMG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790173286 | 574 Count | 136 Count | 136 Count | 4.08 VDC | 0 VDC |
| 1790171482 | 568 Count | 133 Count | 133 Count | 4.08 VDC | 0 VDC |
| 1790169677 | 565 Count | 132 Count | 132 Count | 4.07 VDC | 0 VDC |
| 1790167873 | 563 Count | 132 Count | 132 Count | 4.08 VDC | 0 VDC |
| 1790166069 | 561 Count | 132 Count | 132 Count | 4.07 VDC | 0 VDC |
| 1790164265 | 558 Count | 132 Count | 132 Count | 4.07 VDC | 0 VDC |
| 1790162460 | 556 Count | 132 Count | 132 Count | 4.07 VDC | 0 VDC |
| 1790160656 | 552 Count | 132 Count | 132 Count | 4.07 VDC | 0 VDC |
| 1790158852 | 550 Count | 132 Count | 132 Count | 4.06 VDC | 0 VDC |
| 1790157100 | 548 Count | 132 Count | 132 Count | 4.07 VDC | 0 VDC |
| 1790155296 | 546 Count | 132 Count | 132 Count | 4.07 VDC | 0 VDC |
| 1790153492 | 543 Count | 132 Count | 132 Count | 4.07 VDC | 0 VDC |
| 1790151688 | 541 Count | 132 Count | 132 Count | 4.07 VDC | 0 VDC |
| 1790149883 | 539 Count | 132 Count | 132 Count | 4.05 VDC | 0 VDC |
| 1790148079 | 531 Count | 132 Count | 132 Count | 4.08 VDC | 0 VDC |
| 1790146275 | 527 Count | 132 Count | 132 Count | 4.08 VDC | 0 VDC |
| 1790144470 | 523 Count | 132 Count | 132 Count | 4.07 VDC | 0 VDC |
| 1790142665 | 501 Count | 115 Count | 115 Count | 4.08 VDC | 0 VDC |
| 1790140861 | 496 Count | 115 Count | 115 Count | 4.07 VDC | 0 VDC |
| 1790139057 | 494 Count | 115 Count | 115 Count | 4.06 VDC | 0 VDC |
| 1790137253 | 488 Count | 115 Count | 115 Count | 4.06 VDC | 0 VDC |
| 1790135499 | 484 Count | 115 Count | 115 Count | 4.07 VDC | 0 VDC |
| 1790133695 | 481 Count | 115 Count | 115 Count | 4.07 VDC | 0 VDC |
| 1790131891 | 478 Count | 115 Count | 115 Count | 4.07 VDC | 0 VDC |
| 1790130086 | 476 Count | 115 Count | 115 Count | 4.07 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)