This is the latest recevied telemetry packets stored in our database for station/object YC2YIZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783283119 | 0 Count | 187 Count | 0 Count | 0 VDC | 0 VDC |
| 1783281319 | 0 Count | 173 Count | 0 Count | 0 VDC | 0 VDC |
| 1783279518 | 0 Count | 157 Count | 0 Count | 0 VDC | 0 VDC |
| 1783277718 | 0 Count | 141 Count | 0 Count | 0 VDC | 0 VDC |
| 1783275918 | 0 Count | 121 Count | 0 Count | 0 VDC | 0 VDC |
| 1783274118 | 0 Count | 103 Count | 0 Count | 0 VDC | 0 VDC |
| 1783272318 | 0 Count | 86 Count | 0 Count | 0 VDC | 0 VDC |
| 1783270518 | 0 Count | 67 Count | 0 Count | 0 VDC | 0 VDC |
| 1783268718 | 0 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1783266918 | 0 Count | 29 Count | 0 Count | 0 VDC | 0 VDC |
| 1783265118 | 0 Count | 19 Count | 0 Count | 0 VDC | 0 VDC |
| 1783263317 | 0 Count | 1011 Count | 0 Count | 0 VDC | 0 VDC |
| 1783261518 | 0 Count | 992 Count | 0 Count | 0 VDC | 0 VDC |
| 1783259717 | 0 Count | 977 Count | 0 Count | 0 VDC | 0 VDC |
| 1783257917 | 0 Count | 962 Count | 0 Count | 0 VDC | 0 VDC |
| 1783256117 | 0 Count | 942 Count | 0 Count | 0 VDC | 0 VDC |
| 1783254317 | 0 Count | 925 Count | 0 Count | 0 VDC | 0 VDC |
| 1783252517 | 0 Count | 909 Count | 0 Count | 0 VDC | 0 VDC |
| 1783250717 | 0 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1783248917 | 0 Count | 885 Count | 0 Count | 0 VDC | 0 VDC |
| 1783247117 | 0 Count | 877 Count | 0 Count | 0 VDC | 0 VDC |
| 1783245317 | 0 Count | 865 Count | 0 Count | 0 VDC | 0 VDC |
| 1783243517 | 0 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1783241717 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
| 1783239916 | 0 Count | 823 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)