This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBAT* | IBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787563604 | 13.81 V | 45 mA | 0 | 0 | 0 |
| 1787561804 | 13.91 V | -172 mA | 0 | 0 | 0 |
| 1787560004 | 13.88 V | 43 mA | 0 | 0 | 0 |
| 1787558204 | 13.8 V | 41 mA | 0 | 0 | 0 |
| 1787556404 | 14.09 V | -67 mA | 0 | 0 | 0 |
| 1787554604 | 13.85 V | 42 mA | 0 | 0 | 0 |
| 1787552804 | 13.77 V | 49 mA | 0 | 0 | 0 |
| 1787551004 | 13.93 V | 50 mA | 0 | 0 | 0 |
| 1787549204 | 13.81 V | 45 mA | 0 | 0 | 0 |
| 1787547404 | 13.76 V | 48 mA | 0 | 0 | 0 |
| 1787545604 | 13.9 V | 69 mA | 0 | 0 | 0 |
| 1787542004 | 14.09 V | -235 mA | 0 | 0 | 0 |
| 1787540203 | 13.53 V | -353 mA | 0 | 0 | 0 |
| 1787538403 | 13.42 V | -207 mA | 0 | 0 | 0 |
| 1787536604 | 13.4 V | -191 mA | 0 | 0 | 0 |
| 1787534804 | 13.4 V | -193 mA | 0 | 0 | 0 |
| 1787533004 | 13.36 V | -193 mA | 0 | 0 | 0 |
| 1787531203 | 13.29 V | -98 mA | 0 | 0 | 0 |
| 1787529404 | 13.24 V | 27 mA | 0 | 0 | 0 |
| 1787529393 | 13.24 V | 29 mA | 0 | 0 | 0 |
| 1787525209 | 13.23 V | 52 mA | 0 | 0 | 0 |
| 1787523409 | 13.23 V | 52 mA | 0 | 0 | 0 |
| 1787521609 | 13.23 V | 46 mA | 0 | 0 | 0 |
| 1787519809 | 13.23 V | 48 mA | 0 | 0 | 0 |
| 1787518009 | 13.23 V | 51 mA | 0 | 0 | 0 |
*Used Equation Coefficients:
VBAT: 0, 0.01, 0
IBAT: 0, 1, -2000
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)