This is the latest recevied telemetry packets stored in our database for station/object YD2CFW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779450722 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1779448922 | 0 Count | 827 Count | 0 Count | 0 VDC | 0 VDC |
| 1779447122 | 0 Count | 827 Count | 0 Count | 0 VDC | 0 VDC |
| 1779445322 | 0 Count | 826 Count | 0 Count | 0 VDC | 0 VDC |
| 1779443521 | 0 Count | 824 Count | 0 Count | 0 VDC | 0 VDC |
| 1779441721 | 0 Count | 823 Count | 0 Count | 0 VDC | 0 VDC |
| 1779439921 | 0 Count | 823 Count | 0 Count | 0 VDC | 0 VDC |
| 1779438121 | 0 Count | 822 Count | 0 Count | 0 VDC | 0 VDC |
| 1779436321 | 0 Count | 804 Count | 0 Count | 0 VDC | 0 VDC |
| 1779434520 | 0 Count | 779 Count | 0 Count | 0 VDC | 0 VDC |
| 1779432720 | 0 Count | 752 Count | 0 Count | 0 VDC | 0 VDC |
| 1779430919 | 0 Count | 728 Count | 0 Count | 0 VDC | 0 VDC |
| 1779429119 | 0 Count | 698 Count | 0 Count | 0 VDC | 0 VDC |
| 1779427319 | 0 Count | 676 Count | 0 Count | 0 VDC | 0 VDC |
| 1779425519 | 0 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1779423719 | 0 Count | 618 Count | 0 Count | 0 VDC | 0 VDC |
| 1779421919 | 0 Count | 593 Count | 0 Count | 0 VDC | 0 VDC |
| 1779420119 | 0 Count | 566 Count | 0 Count | 0 VDC | 0 VDC |
| 1779418319 | 0 Count | 532 Count | 0 Count | 0 VDC | 0 VDC |
| 1779416519 | 0 Count | 500 Count | 0 Count | 0 VDC | 0 VDC |
| 1779414719 | 0 Count | 471 Count | 0 Count | 0 VDC | 0 VDC |
| 1779412919 | 0 Count | 444 Count | 0 Count | 0 VDC | 0 VDC |
| 1779411119 | 0 Count | 415 Count | 0 Count | 0 VDC | 0 VDC |
| 1779409319 | 0 Count | 386 Count | 0 Count | 0 VDC | 0 VDC |
| 1779407519 | 0 Count | 356 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)