This is the latest recevied telemetry packets stored in our database for station/object DG6DXG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758405442 | 26.5 C | 37.68 % | 1022.63 hPa | 0 | 0 |
| 1758404537 | 26.8 C | 37.83 % | 1022.5 hPa | 0 | 0 |
| 1758403632 | 27.1 C | 37.46 % | 1020.75 hPa | 0 | 0 |
| 1758402727 | 27.5 C | 37.79 % | 1023.25 hPa | 0 | 0 |
| 1758401822 | 27.8 C | 37.3 % | 1022.13 hPa | 0 | 0 |
| 1758400917 | 28.2 C | 37.09 % | 1022 hPa | 0 | 0 |
| 1758400012 | 28.6 C | 36.97 % | 1019.75 hPa | 0 | 0 |
| 1758399107 | 29 C | 36.98 % | 1022.25 hPa | 0 | 0 |
| 1758398202 | 29.4 C | 37.2 % | 1022.88 hPa | 0 | 0 |
| 1758397297 | 29.8 C | 37.27 % | 1022.63 hPa | 0 | 0 |
| 1758396392 | 30.2 C | 36.66 % | 1022.25 hPa | 0 | 0 |
| 1758395487 | 30.6 C | 37.01 % | 1022.88 hPa | 0 | 0 |
| 1758394582 | 31 C | 36.25 % | 1021.88 hPa | 0 | 0 |
| 1758393677 | 31.4 C | 36.42 % | 1022.5 hPa | 0 | 0 |
| 1758392772 | 31.8 C | 36.34 % | 1021.88 hPa | 0 | 0 |
| 1758391867 | 32.2 C | 36.37 % | 1021.75 hPa | 0 | 0 |
| 1758390962 | 32.7 C | 36.22 % | 1021.38 hPa | 0 | 0 |
| 1758389152 | 33.5 C | 36.44 % | 1022.13 hPa | 0 | 0 |
| 1758388247 | 33.9 C | 36.67 % | 1022 hPa | 0 | 0 |
| 1758387342 | 34.3 C | 36.58 % | 1021.75 hPa | 0 | 0 |
| 1758386437 | 34.6 C | 36.98 % | 1022.63 hPa | 0 | 0 |
| 1758385532 | 34.9 C | 36.93 % | 1023.38 hPa | 0 | 0 |
| 1758384627 | 35.3 C | 37.39 % | 1021.38 hPa | 0 | 0 |
| 1758383722 | 35.6 C | 37.45 % | 1023.25 hPa | 0 | 0 |
| 1758382817 | 36 C | 37.17 % | 1021.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)