This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795359625 | 122 Count | 194 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1795358425 | 121 Count | 191 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1795357224 | 120 Count | 189 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1795356023 | 119 Count | 187 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1795354822 | 118 Count | 182 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1795353621 | 117 Count | 181 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1795352421 | 116 Count | 180 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1795351220 | 115 Count | 179 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1795350019 | 114 Count | 178 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1795348818 | 113 Count | 172 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1795347618 | 112 Count | 171 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1795346417 | 111 Count | 170 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1795345216 | 110 Count | 169 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1795344015 | 109 Count | 168 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1795342815 | 108 Count | 167 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795341627 | 107 Count | 166 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1795340426 | 106 Count | 165 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795339226 | 105 Count | 164 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1795338025 | 104 Count | 163 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1795336824 | 103 Count | 162 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795335623 | 102 Count | 161 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795334423 | 101 Count | 160 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1795333222 | 100 Count | 159 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1795332021 | 99 Count | 158 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1795330820 | 98 Count | 157 Count | 0 Count | 4.27 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)