This is the latest recevied telemetry packets stored in our database for station/object EA4FKJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777817951 | 0 Count | 256 Count | 0 Count | 0 VDC | 0 VDC |
| 1777816151 | 0 Count | 234 Count | 0 Count | 0 VDC | 0 VDC |
| 1777814351 | 0 Count | 212 Count | 0 Count | 0 VDC | 0 VDC |
| 1777812551 | 0 Count | 195 Count | 0 Count | 0 VDC | 0 VDC |
| 1777810751 | 0 Count | 173 Count | 0 Count | 0 VDC | 0 VDC |
| 1777808951 | 0 Count | 154 Count | 0 Count | 0 VDC | 0 VDC |
| 1777807151 | 0 Count | 133 Count | 0 Count | 0 VDC | 0 VDC |
| 1777805351 | 0 Count | 110 Count | 0 Count | 0 VDC | 0 VDC |
| 1777803550 | 0 Count | 92 Count | 0 Count | 0 VDC | 0 VDC |
| 1777801749 | 0 Count | 1076 Count | 0 Count | 0 VDC | 0 VDC |
| 1777799949 | 0 Count | 971 Count | 0 Count | 0 VDC | 0 VDC |
| 1777798149 | 0 Count | 880 Count | 0 Count | 0 VDC | 0 VDC |
| 1777796349 | 0 Count | 800 Count | 0 Count | 0 VDC | 0 VDC |
| 1777794549 | 0 Count | 712 Count | 0 Count | 0 VDC | 0 VDC |
| 1777792749 | 0 Count | 613 Count | 0 Count | 0 VDC | 0 VDC |
| 1777790949 | 0 Count | 527 Count | 0 Count | 0 VDC | 0 VDC |
| 1777789149 | 0 Count | 447 Count | 0 Count | 0 VDC | 0 VDC |
| 1777787349 | 0 Count | 358 Count | 0 Count | 0 VDC | 0 VDC |
| 1777785549 | 0 Count | 273 Count | 0 Count | 0 VDC | 0 VDC |
| 1777783748 | 0 Count | 198 Count | 0 Count | 0 VDC | 0 VDC |
| 1777781948 | 0 Count | 122 Count | 0 Count | 0 VDC | 0 VDC |
| 1777780148 | 0 Count | 60 Count | 0 Count | 0 VDC | 0 VDC |
| 1777778348 | 0 Count | 31 Count | 0 Count | 0 VDC | 0 VDC |
| 1777776548 | 0 Count | 1016 Count | 0 Count | 0 VDC | 0 VDC |
| 1777774748 | 0 Count | 991 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)