This is the latest recevied telemetry packets stored in our database for station/object SP1HSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779374733 | 56 Count | 174 Count | 53 Count | 4.15 VDC | 0.14 VDC |
| 1779372930 | 44 Count | 148 Count | 42 Count | 4.16 VDC | 0.14 VDC |
| 1779371163 | 33 Count | 103 Count | 32 Count | 4.13 VDC | 0.14 VDC |
| 1779369360 | 11 Count | 53 Count | 11 Count | 4.13 VDC | 0.14 VDC |
| 1779367557 | 536 Count | 1020 Count | 510 Count | 4.13 VDC | 0.14 VDC |
| 1779365754 | 516 Count | 984 Count | 491 Count | 4.13 VDC | 0.14 VDC |
| 1779363951 | 478 Count | 937 Count | 454 Count | 4.13 VDC | 0.14 VDC |
| 1779362148 | 471 Count | 922 Count | 448 Count | 4.13 VDC | 0.14 VDC |
| 1779360345 | 445 Count | 878 Count | 423 Count | 4.13 VDC | 0.14 VDC |
| 1779358542 | 389 Count | 796 Count | 368 Count | 4.13 VDC | 0.14 VDC |
| 1779356739 | 363 Count | 757 Count | 343 Count | 4.14 VDC | 0.14 VDC |
| 1779354936 | 348 Count | 726 Count | 329 Count | 4.13 VDC | 0.14 VDC |
| 1779353133 | 322 Count | 687 Count | 304 Count | 4.13 VDC | 0.14 VDC |
| 1779351330 | 311 Count | 666 Count | 294 Count | 4.14 VDC | 0.14 VDC |
| 1779349563 | 300 Count | 644 Count | 284 Count | 4.13 VDC | 0.14 VDC |
| 1779347760 | 289 Count | 625 Count | 274 Count | 4.13 VDC | 0.14 VDC |
| 1779345957 | 280 Count | 604 Count | 266 Count | 4.14 VDC | 0.14 VDC |
| 1779344154 | 272 Count | 589 Count | 259 Count | 4.13 VDC | 0.14 VDC |
| 1779342351 | 258 Count | 560 Count | 246 Count | 4.14 VDC | 0.14 VDC |
| 1779340548 | 224 Count | 510 Count | 213 Count | 4.14 VDC | 0.14 VDC |
| 1779338745 | 196 Count | 418 Count | 186 Count | 4.14 VDC | 0.14 VDC |
| 1779336942 | 174 Count | 368 Count | 165 Count | 4.15 VDC | 0.14 VDC |
| 1779335139 | 159 Count | 341 Count | 151 Count | 4.02 VDC | 0.14 VDC |
| 1779333336 | 147 Count | 318 Count | 140 Count | 3.54 VDC | 0.14 VDC |
| 1779331533 | 128 Count | 277 Count | 122 Count | 3.59 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)