EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

IZ2XCK-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ2XCK-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxPkt*	TxPkt*	Batt*	Volt Aux*	Ampere Aux*
1783290548	0 Pkt/10m	0 Pkt/10m	4.19 Volt	0 Volt	0 Ampere
1783289348	0 Pkt/10m	0 Pkt/10m	4.29 Volt	0 Volt	0 Ampere
1783288147	0 Pkt/10m	0 Pkt/10m	4.37 Volt	0 Volt	0 Ampere
1783286947	0 Pkt/10m	0 Pkt/10m	4.29 Volt	0 Volt	0 Ampere
1783285746	0 Pkt/10m	0 Pkt/10m	4.19 Volt	0 Volt	0 Ampere
1783284546	1 Pkt/10m	0 Pkt/10m	4.27 Volt	12.6 Volt	0.27 Ampere
1783283346	0 Pkt/10m	0 Pkt/10m	4.19 Volt	12.6 Volt	0.27 Ampere
1783282145	0 Pkt/10m	0 Pkt/10m	4.35 Volt	12.6 Volt	0.26 Ampere
1783280945	0 Pkt/10m	0 Pkt/10m	4.21 Volt	12.6 Volt	0.26 Ampere
1783279745	0 Pkt/10m	0 Pkt/10m	4.23 Volt	12.6 Volt	0.27 Ampere
1783278544	0 Pkt/10m	0 Pkt/10m	4.23 Volt	12.6 Volt	0.26 Ampere
1783277344	0 Pkt/10m	0 Pkt/10m	4.33 Volt	12.6 Volt	0.2 Ampere
1783276143	0 Pkt/10m	0 Pkt/10m	4.17 Volt	12.6 Volt	0.19 Ampere
1783274943	0 Pkt/10m	0 Pkt/10m	4.29 Volt	12.6 Volt	0.17 Ampere
1783273742	0 Pkt/10m	0 Pkt/10m	4.31 Volt	12.7 Volt	0.12 Ampere
1783272542	0 Pkt/10m	0 Pkt/10m	4.21 Volt	12.7 Volt	0.1 Ampere
1783271342	0 Pkt/10m	0 Pkt/10m	4.19 Volt	12.7 Volt	0.06 Ampere
1783270141	0 Pkt/10m	0 Pkt/10m	4.35 Volt	0 Volt	0 Ampere
1783268941	0 Pkt/10m	0 Pkt/10m	4.23 Volt	14.2 Volt	0.01 Ampere
1783267740	0 Pkt/10m	0 Pkt/10m	4.35 Volt	0 Volt	0 Ampere
1783266540	0 Pkt/10m	0 Pkt/10m	4.21 Volt	13 Volt	-0.18 Ampere
1783265340	0 Pkt/10m	0 Pkt/10m	4.17 Volt	12.8 Volt	0.04 Ampere
1783264139	0 Pkt/10m	0 Pkt/10m	4.29 Volt	13 Volt	-0.01 Ampere
1783262939	0 Pkt/10m	0 Pkt/10m	4.37 Volt	0 Volt	0 Ampere
1783261738	0 Pkt/10m	0 Pkt/10m	4.23 Volt	13.4 Volt	0.25 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)