This is the latest recevied telemetry packets stored in our database for station/object DO1JM-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787552778 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1787552520 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1787552135 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1787551231 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1787548519 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1787546711 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1787543999 | 3.73 VDC | 0 | 0 | 0 | 0 |
| 1787542191 | 3.77 VDC | 0 | 0 | 0 | 0 |
| 1787517005 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1787516101 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1787515197 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1787514293 | 4.12 VDC | 0 | 0 | 0 | 0 |
| 1787513390 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787512485 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787512021 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787511116 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787509947 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787508139 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787506330 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787505427 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787504523 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787503618 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787502049 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787501145 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787499337 | 4.13 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)