This is the latest recevied telemetry packets stored in our database for station/object HS2AC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAT* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783244478 | 30.45 °C | 65.1 %RH | 3.82 V | 0 | 0 |
| 1783243437 | 30.95 °C | 64.9 %RH | 3.82 V | 0 | 0 |
| 1783242406 | 30.08 °C | 64.8 %RH | 3.8 V | 0 | 0 |
| 1783242347 | 30.06 °C | 64.4 %RH | 3.8 V | 0 | 0 |
| 1783237191 | 32.63 °C | 63.3 %RH | 3.76 V | 0 | 0 |
| 1783237127 | 32.58 °C | 65.2 %RH | 3.77 V | 0 | 0 |
| 1783237043 | 32.03 °C | 65 %RH | 3.77 V | 0 | 0 |
| 1783236988 | 32.09 °C | 64.6 %RH | 3.77 V | 0 | 0 |
| 1783230666 | 30.81 °C | 71.1 %RH | 3.67 V | 0 | 0 |
| 1783230576 | 30.43 °C | 73.2 %RH | 3.67 V | 0 | 0 |
| 1783229321 | 29.74 °C | 76.3 %RH | 3.66 V | 0 | 0 |
| 1783228330 | 28.93 °C | 77.3 %RH | 3.65 V | 0 | 0 |
| 1783228262 | 28.94 °C | 77.5 %RH | 3.65 V | 0 | 0 |
| 1783227232 | 29.02 °C | 76 %RH | 3.65 V | 0 | 0 |
| 1783226212 | 28.6 °C | 80.6 %RH | 3.64 V | 0 | 0 |
| 1783225070 | 29.53 °C | 78.7 %RH | 3.61 V | 0 | 0 |
| 1783224985 | 29.33 °C | 79.1 %RH | 3.61 V | 0 | 0 |
| 1783224848 | 29.48 °C | 77.6 %RH | 3.61 V | 0 | 0 |
| 1783223801 | 29.02 °C | 79.7 %RH | 3.58 V | 0 | 0 |
| 1783222766 | 28.33 °C | 85.3 %RH | 3.54 V | 0 | 0 |
| 1783222730 | 28.33 °C | 85.2 %RH | 3.52 V | 0 | 0 |
| 1783221671 | 28.75 °C | 84 %RH | 3.49 V | 0 | 0 |
| 1783220637 | 28 °C | 86.3 %RH | 3.38 V | 0 | 0 |
| 1783219603 | 26.93 °C | 93.4 %RH | 3.32 V | 0 | 0 |
| 1783218570 | 26.29 °C | 94.9 %RH | 3.27 V | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAT: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)