This is the latest recevied telemetry packets stored in our database for station/object SP7MP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775495303 | 78 Count | 675 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775493502 | 77 Count | 672 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775491702 | 76 Count | 648 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775489908 | 75 Count | 640 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775488108 | 74 Count | 637 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775486307 | 73 Count | 631 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775484506 | 72 Count | 623 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775482705 | 71 Count | 616 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775480905 | 70 Count | 610 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775479104 | 69 Count | 606 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775477303 | 68 Count | 598 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775475503 | 67 Count | 593 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775473702 | 66 Count | 580 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775471901 | 65 Count | 575 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775470101 | 64 Count | 564 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775468307 | 63 Count | 558 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775466506 | 62 Count | 546 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775464706 | 61 Count | 539 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775462905 | 60 Count | 530 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775461104 | 59 Count | 527 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775459304 | 58 Count | 520 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775457503 | 57 Count | 515 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775455702 | 56 Count | 509 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1775453901 | 55 Count | 502 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1775452101 | 54 Count | 497 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)