This is the latest recevied telemetry packets stored in our database for station/object SV6GIM-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785072062 | 26.8 C | 1021.13 hPa | 0 | 0 | 0 |
| 1785065664 | 28 C | 1020.88 hPa | 0 | 0 | 0 |
| 1785065454 | 27.8 C | 1020.38 hPa | 0 | 0 | 0 |
| 1785060510 | 26.5 C | 1022.5 hPa | 0 | 0 | 0 |
| 1785048382 | 22.9 C | 1020.75 hPa | 0 | 0 | 0 |
| 1785047095 | 24.1 C | 1022.25 hPa | 0 | 0 | 0 |
| 1785038739 | 27.3 C | 1021 hPa | 0 | 0 | 0 |
| 1785029707 | 27.7 C | 1020.63 hPa | 0 | 0 | 0 |
| 1785020676 | 26.9 C | 1020.13 hPa | 0 | 0 | 0 |
| 1785013196 | 26.1 C | 1019.75 hPa | 0 | 0 | 0 |
| 1785010323 | 26.4 C | 1017.5 hPa | 0 | 0 | 0 |
| 1784999295 | 26.8 C | 1016.88 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)