This is the latest recevied telemetry packets stored in our database for station/object SV2HQL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775498788 | 20.4 C | 1029.63 hPa | 0 | 0 | 0 |
| 1775497884 | 20.1 C | 1030.75 hPa | 0 | 0 | 0 |
| 1775496980 | 20 C | 1028.63 hPa | 0 | 0 | 0 |
| 1775496076 | 18.9 C | 1028.75 hPa | 0 | 0 | 0 |
| 1775495172 | 18 C | 1028 hPa | 0 | 0 | 0 |
| 1775494268 | 17.9 C | 1028.63 hPa | 0 | 0 | 0 |
| 1775492460 | 18.1 C | 1028.75 hPa | 0 | 0 | 0 |
| 1775491556 | 18.3 C | 1027.25 hPa | 0 | 0 | 0 |
| 1775490652 | 18.2 C | 1028.75 hPa | 0 | 0 | 0 |
| 1775489748 | 18.2 C | 1028.88 hPa | 0 | 0 | 0 |
| 1775488844 | 18.4 C | 1029.63 hPa | 0 | 0 | 0 |
| 1775487940 | 18.3 C | 1028.13 hPa | 0 | 0 | 0 |
| 1775486132 | 17.9 C | 1027.75 hPa | 0 | 0 | 0 |
| 1775485228 | 17.9 C | 1029.13 hPa | 0 | 0 | 0 |
| 1775484324 | 18.4 C | 1028.63 hPa | 0 | 0 | 0 |
| 1775483420 | 28.4 C | 1028.13 hPa | 0 | 0 | 0 |
| 1775483240 | 35.5 C | 1029 hPa | 0 | 0 | 0 |
| 1775483216 | 35.5 C | 1028.5 hPa | 0 | 0 | 0 |
| 1775483192 | 33.6 C | 1028.88 hPa | 0 | 0 | 0 |
| 1775483168 | 33.6 C | 1028.75 hPa | 0 | 0 | 0 |
| 1775483132 | 35.2 C | 1029.5 hPa | 0 | 0 | 0 |
| 1775483108 | 35.2 C | 1028.88 hPa | 0 | 0 | 0 |
| 1775483084 | 29.5 C | 1028.75 hPa | 0 | 0 | 0 |
| 1775483060 | 29.5 C | 1028.13 hPa | 0 | 0 | 0 |
| 1775483016 | 26.3 C | 1028.25 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)