This is the latest recevied telemetry packets stored in our database for station/object DO2HN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779385270 | 30.3 C | 22.98 % | 1031 hPa | 0 | 0 |
| 1779384366 | 31.3 C | 21.4 % | 1029.38 hPa | 0 | 0 |
| 1779383462 | 32.2 C | 21.32 % | 1030.38 hPa | 0 | 0 |
| 1779383427 | 32 C | 21.71 % | 1028.38 hPa | 0 | 0 |
| 1779383409 | 32 C | 21.71 % | 1030.13 hPa | 0 | 0 |
| 1779383385 | 31.8 C | 22.25 % | 1029.5 hPa | 0 | 0 |
| 1779383315 | 31.7 C | 22.28 % | 1031 hPa | 0 | 0 |
| 1779383299 | 31.7 C | 22.28 % | 1029.75 hPa | 0 | 0 |
| 1779383283 | 31.7 C | 22.28 % | 1029.88 hPa | 0 | 0 |
| 1779383261 | 31.7 C | 21.84 % | 1030.25 hPa | 0 | 0 |
| 1779382793 | 32.1 C | 20.5 % | 1031.88 hPa | 0 | 0 |
| 1779381200 | 33.6 C | 19.4 % | 1028 hPa | 0 | 0 |
| 1779381184 | 33.6 C | 19.4 % | 1029.75 hPa | 0 | 0 |
| 1779381168 | 33.6 C | 19.4 % | 1030.88 hPa | 0 | 0 |
| 1779381152 | 33.6 C | 19.4 % | 1030.13 hPa | 0 | 0 |
| 1779381105 | 33.6 C | 20.27 % | 1030.63 hPa | 0 | 0 |
| 1779381076 | 33.7 C | 19.45 % | 1029.38 hPa | 0 | 0 |
| 1779381060 | 33.7 C | 19.45 % | 1030.63 hPa | 0 | 0 |
| 1779381040 | 33.7 C | 19.45 % | 1029.88 hPa | 0 | 0 |
| 1779381024 | 33.7 C | 19.45 % | 1030.13 hPa | 0 | 0 |
| 1779380231 | 34.7 C | 19.14 % | 1029 hPa | 0 | 0 |
| 1779379327 | 36.2 C | 16.87 % | 1029.38 hPa | 0 | 0 |
| 1779379305 | 36.2 C | 17.47 % | 1029.5 hPa | 0 | 0 |
| 1779379288 | 36.2 C | 17.47 % | 1029.75 hPa | 0 | 0 |
| 1779379266 | 36.2 C | 17.47 % | 1029.13 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)