This is the latest recevied telemetry packets stored in our database for station/object YD1AFF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatu* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787544474 | 41 °C | 29 %RH | 1011 hPa | 0 | 0 |
| 1787542574 | 42 °C | 29 %RH | 1012 hPa | 0 | 0 |
| 1787540674 | 41 °C | 33 %RH | 1012 hPa | 0 | 0 |
| 1787538774 | 39 °C | 39 %RH | 1013 hPa | 0 | 0 |
| 1787536874 | 38 °C | 42 %RH | 1013 hPa | 0 | 0 |
| 1787534158 | 36 °C | 47 %RH | 1012 hPa | 0 | 0 |
| 1787532258 | 33 °C | 51 %RH | 1012 hPa | 0 | 0 |
| 1787530358 | 31 °C | 54 %RH | 1012 hPa | 0 | 0 |
| 1787528458 | 30 °C | 56 %RH | 1011 hPa | 0 | 0 |
| 1787526557 | 29 °C | 57 %RH | 1011 hPa | 0 | 0 |
| 1787524657 | 29 °C | 57 %RH | 1011 hPa | 0 | 0 |
| 1787520984 | 30 °C | 57 %RH | 1010 hPa | 0 | 0 |
| 1787520971 | 30 °C | 57 %RH | 1010 hPa | 0 | 0 |
| 1787520971 | 30 °C | 57 %RH | 1010 hPa | 0 | 0 |
| 1787520971 | 30 °C | 57 %RH | 1010 hPa | 0 | 0 |
| 1787518788 | 29 °C | 57 %RH | 1010 hPa | 0 | 0 |
| 1787516888 | 29 °C | 57 %RH | 1010 hPa | 0 | 0 |
| 1787514988 | 29 °C | 57 %RH | 1010 hPa | 0 | 0 |
| 1787513088 | 29 °C | 57 %RH | 1010 hPa | 0 | 0 |
| 1787511188 | 29 °C | 58 %RH | 1010 hPa | 0 | 0 |
| 1787509288 | 29 °C | 58 %RH | 1010 hPa | 0 | 0 |
| 1787505829 | 29 °C | 58 %RH | 1011 hPa | 0 | 0 |
| 1787503929 | 29 °C | 58 %RH | 1011 hPa | 0 | 0 |
| 1787500865 | 29 °C | 58 %RH | 1011 hPa | 0 | 0 |
| 1787500653 | 29 °C | 57 %RH | 1011 hPa | 0 | 0 |
*Used Equation Coefficients:
Temperatu: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)