EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SP6PTT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6PTT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1791444006	30 Count	244 Count	24 Count
1791442205	147 Count	1138 Count	136 Count
1791440404	117 Count	881 Count	107 Count
1791438603	95 Count	698 Count	88 Count
1791436803	72 Count	533 Count	66 Count
1791435012	43 Count	302 Count	39 Count
1791433211	188 Count	1186 Count	175 Count
1791431410	160 Count	940 Count	149 Count
1791429609	129 Count	747 Count	120 Count
1791427809	101 Count	595 Count	94 Count
1791426008	78 Count	468 Count	73 Count
1791424207	53 Count	321 Count	49 Count
1791422406	28 Count	162 Count	26 Count
1791420606	179 Count	1005 Count	168 Count
1791418805	152 Count	844 Count	143 Count
1791417004	128 Count	716 Count	121 Count
1791415203	100 Count	554 Count	94 Count
1791413411	80 Count	450 Count	76 Count
1791411610	53 Count	323 Count	51 Count
1791409809	27 Count	159 Count	27 Count
1791408008	136 Count	1032 Count	124 Count
1791406208	107 Count	833 Count	97 Count
1791404407	77 Count	617 Count	68 Count
1791402606	47 Count	403 Count	44 Count
1791400805	27 Count	230 Count	25 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)