This is the latest recevied telemetry packets stored in our database for station/object SP3NGH-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795358727 | 676 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795356925 | 650 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795355124 | 617 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795353323 | 585 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795351521 | 555 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795349720 | 536 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795347919 | 527 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795346118 | 523 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795344316 | 514 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795342514 | 510 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795340712 | 506 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795338911 | 499 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795337110 | 492 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795335309 | 488 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795333508 | 484 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795331735 | 480 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795329934 | 476 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795328133 | 472 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795326332 | 468 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795324531 | 464 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795322730 | 460 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795320928 | 456 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795319127 | 452 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795317326 | 448 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
| 1795315525 | 444 Count | 111 Count | 57 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)