This is the latest recevied telemetry packets stored in our database for station/object SQ5K-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762810279 | 277 Count | 48 Count | 48 Count | 3.93 VDC | 0 VDC |
| 1762808479 | 276 Count | 48 Count | 48 Count | 3.94 VDC | 0 VDC |
| 1762806678 | 275 Count | 48 Count | 48 Count | 3.89 VDC | 0 VDC |
| 1762804871 | 274 Count | 48 Count | 48 Count | 4.01 VDC | 0 VDC |
| 1762803070 | 273 Count | 48 Count | 48 Count | 3.97 VDC | 0 VDC |
| 1762801269 | 272 Count | 48 Count | 48 Count | 4.07 VDC | 0 VDC |
| 1762799469 | 271 Count | 48 Count | 48 Count | 4.2 VDC | 0 VDC |
| 1762797668 | 270 Count | 48 Count | 48 Count | 4.12 VDC | 0 VDC |
| 1762795874 | 269 Count | 48 Count | 48 Count | 4.04 VDC | 0 VDC |
| 1762794073 | 268 Count | 48 Count | 48 Count | 3.64 VDC | 0 VDC |
| 1762792273 | 267 Count | 48 Count | 48 Count | 3.69 VDC | 0 VDC |
| 1762790472 | 266 Count | 48 Count | 48 Count | 3.7 VDC | 0 VDC |
| 1762788671 | 265 Count | 48 Count | 48 Count | 3.71 VDC | 0 VDC |
| 1762786871 | 264 Count | 48 Count | 48 Count | 3.73 VDC | 0 VDC |
| 1762785070 | 263 Count | 48 Count | 48 Count | 3.71 VDC | 0 VDC |
| 1762783269 | 262 Count | 48 Count | 48 Count | 3.77 VDC | 0 VDC |
| 1762781469 | 261 Count | 48 Count | 48 Count | 3.79 VDC | 0 VDC |
| 1762779668 | 260 Count | 48 Count | 48 Count | 3.81 VDC | 0 VDC |
| 1762777868 | 259 Count | 48 Count | 48 Count | 3.84 VDC | 0 VDC |
| 1762776060 | 258 Count | 48 Count | 48 Count | 3.86 VDC | 0 VDC |
| 1762774277 | 257 Count | 48 Count | 48 Count | 3.84 VDC | 0 VDC |
| 1762772477 | 256 Count | 48 Count | 48 Count | 4.04 VDC | 0 VDC |
| 1762770675 | 255 Count | 48 Count | 48 Count | 4.02 VDC | 0 VDC |
| 1762768874 | 254 Count | 48 Count | 48 Count | 3.76 VDC | 0 VDC |
| 1762767074 | 253 Count | 48 Count | 48 Count | 3.75 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)