This is the latest recevied telemetry packets stored in our database for station/object WB5PJB-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1771546616 | 10.8 C | 18.39 % | 1031.88 hPa | 0 | 0 |
| 1771546445 | 10.5 C | 18.48 % | 1032 hPa | 0 | 0 |
| 1771546146 | 9.8 C | 19.03 % | 1030 hPa | 0 | 0 |
| 1771545732 | 8.8 C | 19.01 % | 1026.88 hPa | 0 | 0 |
| 1771545400 | 8 C | 19.86 % | 1029.38 hPa | 0 | 0 |
| 1771545126 | 7.6 C | 20.7 % | 1027.88 hPa | 0 | 0 |
| 1771544763 | 7.2 C | 26.6 % | 810.88 hPa | 0 | 0 |
| 1771511637 | 7.8 C | 31.86 % | 1026.5 hPa | 0 | 0 |
| 1771511450 | 7.9 C | 33.01 % | 1025 hPa | 0 | 0 |
| 1771511231 | 8 C | 33.36 % | 1024.88 hPa | 0 | 0 |
| 1771511012 | 8.1 C | 31.32 % | 1029 hPa | 0 | 0 |
| 1771510653 | 8.5 C | 28.94 % | 1026.38 hPa | 0 | 0 |
| 1771510447 | 8.6 C | 28.06 % | 1030.38 hPa | 0 | 0 |
| 1771510239 | 8.7 C | 26.57 % | 1031.75 hPa | 0 | 0 |
| 1771510054 | 8.7 C | 24.53 % | 785.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)