This is the latest recevied telemetry packets stored in our database for station/object YE3ESW-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787534481 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787530199 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787529953 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787529873 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787529812 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787529392 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787528377 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787527173 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787526491 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787526108 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787525726 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787525343 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787525085 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787525022 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787524958 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787524912 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787524894 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787524766 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787524703 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
| 1787524572 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787524509 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787524445 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787524381 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787524253 | 33 °C | 42 %RH | 1014 hPa | 0 | 0 |
| 1787524190 | 33 °C | 41 %RH | 1014 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)