This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795360751 | 265 Count | 685 Count | 213 Count | 4.12 VDC | 0 VDC |
| 1795359850 | 260 Count | 674 Count | 209 Count | 4.12 VDC | 0 VDC |
| 1795358950 | 255 Count | 660 Count | 205 Count | 4.12 VDC | 0 VDC |
| 1795358049 | 249 Count | 646 Count | 200 Count | 4.12 VDC | 0 VDC |
| 1795357148 | 244 Count | 636 Count | 196 Count | 4.11 VDC | 0 VDC |
| 1795356246 | 237 Count | 616 Count | 190 Count | 4.11 VDC | 0 VDC |
| 1795355344 | 231 Count | 596 Count | 185 Count | 4.12 VDC | 0 VDC |
| 1795354443 | 225 Count | 557 Count | 180 Count | 4.12 VDC | 0 VDC |
| 1795353542 | 218 Count | 528 Count | 174 Count | 4.12 VDC | 0 VDC |
| 1795352641 | 212 Count | 514 Count | 169 Count | 4.12 VDC | 0 VDC |
| 1795351740 | 207 Count | 499 Count | 165 Count | 4.12 VDC | 0 VDC |
| 1795350840 | 201 Count | 473 Count | 160 Count | 4.12 VDC | 0 VDC |
| 1795349959 | 192 Count | 446 Count | 156 Count | 4.12 VDC | 0 VDC |
| 1795349058 | 186 Count | 431 Count | 151 Count | 4.12 VDC | 0 VDC |
| 1795348158 | 181 Count | 416 Count | 147 Count | 4.12 VDC | 0 VDC |
| 1795347257 | 175 Count | 404 Count | 142 Count | 4.12 VDC | 0 VDC |
| 1795346356 | 168 Count | 385 Count | 136 Count | 4.12 VDC | 0 VDC |
| 1795345455 | 162 Count | 372 Count | 131 Count | 4.12 VDC | 0 VDC |
| 1795344554 | 158 Count | 360 Count | 128 Count | 4.12 VDC | 0 VDC |
| 1795343653 | 153 Count | 347 Count | 124 Count | 4.12 VDC | 0 VDC |
| 1795342752 | 147 Count | 331 Count | 119 Count | 4.12 VDC | 0 VDC |
| 1795341852 | 123 Count | 301 Count | 96 Count | 4.12 VDC | 0 VDC |
| 1795340951 | 117 Count | 286 Count | 91 Count | 4.11 VDC | 0 VDC |
| 1795340050 | 113 Count | 276 Count | 88 Count | 4.12 VDC | 0 VDC |
| 1795339149 | 106 Count | 263 Count | 82 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)