This is the latest recevied telemetry packets stored in our database for station/object DO7SRB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787542747 | 272 Count | 266 Count | 260 Count | 4.45 VDC | 0.14 VDC |
| 1787540942 | 256 Count | 251 Count | 245 Count | 4.49 VDC | 0.14 VDC |
| 1787539137 | 236 Count | 231 Count | 226 Count | 4.4 VDC | 0.14 VDC |
| 1787537397 | 216 Count | 212 Count | 207 Count | 4.53 VDC | 0.14 VDC |
| 1787535592 | 197 Count | 193 Count | 189 Count | 4.47 VDC | 0.14 VDC |
| 1787533786 | 176 Count | 173 Count | 169 Count | 4.51 VDC | 0.14 VDC |
| 1787531981 | 157 Count | 155 Count | 151 Count | 4.43 VDC | 0.14 VDC |
| 1787530176 | 136 Count | 134 Count | 131 Count | 4.42 VDC | 0.14 VDC |
| 1787528371 | 114 Count | 112 Count | 110 Count | 4.5 VDC | 0.14 VDC |
| 1787526565 | 93 Count | 92 Count | 90 Count | 4.46 VDC | 0.14 VDC |
| 1787524758 | 69 Count | 68 Count | 67 Count | 4.54 VDC | 0.14 VDC |
| 1787522953 | 45 Count | 45 Count | 44 Count | 4.54 VDC | 0.14 VDC |
| 1787521148 | 22 Count | 22 Count | 22 Count | 4.46 VDC | 0.14 VDC |
| 1787519342 | 1019 Count | 1014 Count | 958 Count | 4.47 VDC | 0.14 VDC |
| 1787517536 | 999 Count | 994 Count | 939 Count | 4.46 VDC | 0.14 VDC |
| 1787516391 | 985 Count | 980 Count | 926 Count | 4.53 VDC | 0.14 VDC |
| 1787514585 | 962 Count | 957 Count | 904 Count | 4.41 VDC | 0.14 VDC |
| 1787512780 | 941 Count | 936 Count | 884 Count | 4.4 VDC | 0.14 VDC |
| 1787510975 | 921 Count | 917 Count | 865 Count | 4.47 VDC | 0.14 VDC |
| 1787509170 | 898 Count | 893 Count | 843 Count | 4.48 VDC | 0.14 VDC |
| 1787507365 | 876 Count | 872 Count | 822 Count | 4.49 VDC | 0.14 VDC |
| 1787505559 | 854 Count | 851 Count | 801 Count | 4.49 VDC | 0.14 VDC |
| 1787503754 | 834 Count | 832 Count | 782 Count | 4.41 VDC | 0.14 VDC |
| 1787501948 | 814 Count | 813 Count | 763 Count | 4.5 VDC | 0.14 VDC |
| 1787500143 | 795 Count | 795 Count | 745 Count | 4.5 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)