This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787538121 | 31 Count | 633 Count | 0 Count | 3.88 VDC | 0 VDC |
| 1787537220 | 30 Count | 595 Count | 0 Count | 3.89 VDC | 0 VDC |
| 1787536320 | 29 Count | 577 Count | 0 Count | 3.89 VDC | 0 VDC |
| 1787533616 | 26 Count | 527 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1787532716 | 25 Count | 512 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1787531815 | 24 Count | 481 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1787530914 | 23 Count | 464 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787530013 | 22 Count | 452 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787529112 | 21 Count | 402 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787528211 | 20 Count | 333 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787527310 | 19 Count | 296 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787526409 | 18 Count | 278 Count | 0 Count | 3.93 VDC | 0 VDC |
| 1787525508 | 17 Count | 260 Count | 0 Count | 3.93 VDC | 0 VDC |
| 1787524607 | 16 Count | 236 Count | 0 Count | 3.93 VDC | 0 VDC |
| 1787523706 | 15 Count | 220 Count | 0 Count | 3.94 VDC | 0 VDC |
| 1787522806 | 14 Count | 204 Count | 0 Count | 3.94 VDC | 0 VDC |
| 1787521904 | 13 Count | 179 Count | 0 Count | 3.94 VDC | 0 VDC |
| 1787520124 | 7 Count | 147 Count | 0 Count | 3.94 VDC | 0 VDC |
| 1787519223 | 6 Count | 129 Count | 0 Count | 3.95 VDC | 0 VDC |
| 1787518322 | 5 Count | 112 Count | 0 Count | 3.95 VDC | 0 VDC |
| 1787517421 | 4 Count | 90 Count | 0 Count | 3.95 VDC | 0 VDC |
| 1787516520 | 3 Count | 75 Count | 0 Count | 3.96 VDC | 0 VDC |
| 1787515619 | 2 Count | 52 Count | 0 Count | 3.96 VDC | 0 VDC |
| 1787514719 | 1 Count | 32 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1787513817 | 0 Count | 14 Count | 0 Count | 3.97 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)