This is the latest recevied telemetry packets stored in our database for station/object YH0AA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Pressure* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775487527 | 39 °C | 1007 hPa | 0 | 0 | 0 |
| 1775485627 | 39 °C | 1007 hPa | 0 | 0 | 0 |
| 1775483727 | 40 °C | 1007 hPa | 0 | 0 | 0 |
| 1775481827 | 39 °C | 1007 hPa | 0 | 0 | 0 |
| 1775479927 | 39 °C | 1007 hPa | 0 | 0 | 0 |
| 1775478024 | 39 °C | 1007 hPa | 0 | 0 | 0 |
| 1775476127 | 39 °C | 1007 hPa | 0 | 0 | 0 |
| 1775474227 | 39 °C | 1006 hPa | 0 | 0 | 0 |
| 1775472327 | 41 °C | 1006 hPa | 0 | 0 | 0 |
| 1775470427 | 42 °C | 1005 hPa | 0 | 0 | 0 |
| 1775468527 | 42 °C | 1004 hPa | 0 | 0 | 0 |
| 1775466627 | 42 °C | 1004 hPa | 0 | 0 | 0 |
| 1775464727 | 42 °C | 1004 hPa | 0 | 0 | 0 |
| 1775462827 | 42 °C | 1004 hPa | 0 | 0 | 0 |
| 1775460927 | 42 °C | 1005 hPa | 0 | 0 | 0 |
| 1775459480 | 42 °C | 1005 hPa | 0 | 0 | 0 |
| 1775457580 | 43 °C | 1005 hPa | 0 | 0 | 0 |
| 1775455680 | 43 °C | 1005 hPa | 0 | 0 | 0 |
| 1775453780 | 43 °C | 1006 hPa | 0 | 0 | 0 |
| 1775451880 | 42 °C | 1006 hPa | 0 | 0 | 0 |
| 1775449980 | 42 °C | 1007 hPa | 0 | 0 | 0 |
| 1775448080 | 42 °C | 1007 hPa | 0 | 0 | 0 |
| 1775446180 | 42 °C | 1008 hPa | 0 | 0 | 0 |
| 1775444280 | 42 °C | 1008 hPa | 0 | 0 | 0 |
| 1775442380 | 41 °C | 1008 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Pressure: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)