This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771565947 | 54 Count | 184 Count | 29 Count | 0 VDC | 0.08 VDC |
| 1771565044 | 53 Count | 183 Count | 29 Count | 0 VDC | 0.08 VDC |
| 1771564141 | 50 Count | 175 Count | 27 Count | 0 VDC | 0.08 VDC |
| 1771563238 | 47 Count | 167 Count | 25 Count | 0 VDC | 0.08 VDC |
| 1771562335 | 45 Count | 160 Count | 24 Count | 0 VDC | 0.08 VDC |
| 1771561432 | 42 Count | 149 Count | 22 Count | 0 VDC | 0.08 VDC |
| 1771560529 | 39 Count | 138 Count | 20 Count | 0 VDC | 0.08 VDC |
| 1771559626 | 38 Count | 131 Count | 20 Count | 0 VDC | 0.08 VDC |
| 1771557890 | 29 Count | 111 Count | 17 Count | 0 VDC | 0.08 VDC |
| 1771556987 | 27 Count | 103 Count | 16 Count | 0 VDC | 0.08 VDC |
| 1771556084 | 24 Count | 93 Count | 14 Count | 0 VDC | 0.08 VDC |
| 1771555181 | 22 Count | 85 Count | 13 Count | 0 VDC | 0.08 VDC |
| 1771554278 | 19 Count | 74 Count | 11 Count | 0 VDC | 0.08 VDC |
| 1771553375 | 17 Count | 64 Count | 10 Count | 0 VDC | 0.08 VDC |
| 1771552472 | 15 Count | 54 Count | 9 Count | 0 VDC | 0.08 VDC |
| 1771551569 | 12 Count | 46 Count | 7 Count | 0 VDC | 0.08 VDC |
| 1771550666 | 10 Count | 39 Count | 6 Count | 0 VDC | 0.08 VDC |
| 1771549763 | 9 Count | 38 Count | 6 Count | 0 VDC | 0.08 VDC |
| 1771548860 | 6 Count | 25 Count | 4 Count | 0 VDC | 0.08 VDC |
| 1771547957 | 3 Count | 14 Count | 2 Count | 0 VDC | 0.08 VDC |
| 1771547054 | 2 Count | 12 Count | 2 Count | 0 VDC | 0.08 VDC |
| 1771546151 | 268 Count | 1008 Count | 142 Count | 0 VDC | 0.08 VDC |
| 1771545248 | 266 Count | 999 Count | 141 Count | 0 VDC | 0.08 VDC |
| 1771544345 | 263 Count | 989 Count | 139 Count | 0 VDC | 0.08 VDC |
| 1771543442 | 261 Count | 980 Count | 138 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)