This is the latest recevied telemetry packets stored in our database for station/object SP6RTS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779383341 | 0 Count | 326 Count | 0 Count | 0 VDC | 0 VDC |
| 1779382439 | 0 Count | 312 Count | 0 Count | 0 VDC | 0 VDC |
| 1779381537 | 0 Count | 302 Count | 0 Count | 0 VDC | 0 VDC |
| 1779380635 | 0 Count | 290 Count | 0 Count | 0 VDC | 0 VDC |
| 1779379732 | 0 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1779378830 | 0 Count | 273 Count | 0 Count | 0 VDC | 0 VDC |
| 1779377928 | 0 Count | 262 Count | 0 Count | 0 VDC | 0 VDC |
| 1779377026 | 0 Count | 251 Count | 0 Count | 0 VDC | 0 VDC |
| 1779376123 | 0 Count | 244 Count | 0 Count | 0 VDC | 0 VDC |
| 1779375221 | 0 Count | 232 Count | 0 Count | 0 VDC | 0 VDC |
| 1779374319 | 0 Count | 218 Count | 0 Count | 0 VDC | 0 VDC |
| 1779373417 | 0 Count | 208 Count | 0 Count | 0 VDC | 0 VDC |
| 1779372514 | 0 Count | 196 Count | 0 Count | 0 VDC | 0 VDC |
| 1779371612 | 0 Count | 184 Count | 0 Count | 0 VDC | 0 VDC |
| 1779370709 | 0 Count | 178 Count | 0 Count | 0 VDC | 0 VDC |
| 1779369807 | 0 Count | 169 Count | 0 Count | 0 VDC | 0 VDC |
| 1779368905 | 0 Count | 161 Count | 0 Count | 0 VDC | 0 VDC |
| 1779368002 | 0 Count | 152 Count | 0 Count | 0 VDC | 0 VDC |
| 1779367100 | 0 Count | 141 Count | 0 Count | 0 VDC | 0 VDC |
| 1779366198 | 0 Count | 128 Count | 0 Count | 0 VDC | 0 VDC |
| 1779365296 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1779364394 | 0 Count | 101 Count | 0 Count | 0 VDC | 0 VDC |
| 1779363545 | 0 Count | 87 Count | 0 Count | 0 VDC | 0 VDC |
| 1779362643 | 0 Count | 77 Count | 0 Count | 0 VDC | 0 VDC |
| 1779361740 | 0 Count | 66 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)