This is the latest recevied telemetry packets stored in our database for station/object YB0RWN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1771591158 | 31 °C | 58 %RH | 1008 hPa | 0 | 0 |
| 1771589358 | 31 °C | 58 %RH | 1008 hPa | 0 | 0 |
| 1771587558 | 31 °C | 58 %RH | 1008 hPa | 0 | 0 |
| 1771585758 | 31 °C | 56 %RH | 1008 hPa | 0 | 0 |
| 1771584480 | 31 °C | 55 %RH | 1008 hPa | 0 | 0 |
| 1771582109 | 31 °C | 55 %RH | 1008 hPa | 0 | 0 |
| 1771580309 | 31 °C | 54 %RH | 1008 hPa | 0 | 0 |
| 1771578509 | 31 °C | 54 %RH | 1007 hPa | 0 | 0 |
| 1771576709 | 31 °C | 55 %RH | 1007 hPa | 0 | 0 |
| 1771574909 | 31 °C | 53 %RH | 1008 hPa | 0 | 0 |
| 1771573109 | 31 °C | 53 %RH | 1008 hPa | 0 | 0 |
| 1771571309 | 31 °C | 56 %RH | 1008 hPa | 0 | 0 |
| 1771569509 | 31 °C | 55 %RH | 1008 hPa | 0 | 0 |
| 1771567709 | 30 °C | 57 %RH | 1009 hPa | 0 | 0 |
| 1771565909 | 31 °C | 55 %RH | 1009 hPa | 0 | 0 |
| 1771564110 | 30 °C | 58 %RH | 1010 hPa | 0 | 0 |
| 1771562309 | 30 °C | 59 %RH | 1010 hPa | 0 | 0 |
| 1771560509 | 30 °C | 63 %RH | 1011 hPa | 0 | 0 |
| 1771558709 | 29 °C | 64 %RH | 1011 hPa | 0 | 0 |
| 1771556909 | 29 °C | 65 %RH | 1011 hPa | 0 | 0 |
| 1771555109 | 29 °C | 64 %RH | 1011 hPa | 0 | 0 |
| 1771553309 | 29 °C | 64 %RH | 1011 hPa | 0 | 0 |
| 1771551509 | 29 °C | 65 %RH | 1011 hPa | 0 | 0 |
| 1771549709 | 29 °C | 65 %RH | 1011 hPa | 0 | 0 |
| 1771547909 | 29 °C | 65 %RH | 1010 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)