This is the latest recevied telemetry packets stored in our database for station/object KC1VMZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1771565160 | 3.45 VDC | 35.6 C | 13.45 % | 0 | 0 |
| 1771565130 | 3.43 VDC | 35.6 C | 13.45 % | 0 | 0 |
| 1771565035 | 3.44 VDC | 35.6 C | 13.45 % | 0 | 0 |
| 1771564132 | 3.49 VDC | 35.3 C | 13.64 % | 0 | 0 |
| 1771564084 | 3.5 VDC | 35.3 C | 13.66 % | 0 | 0 |
| 1771563228 | 3.55 VDC | 35 C | 14.05 % | 0 | 0 |
| 1771563067 | 3.56 VDC | 34.9 C | 14.1 % | 0 | 0 |
| 1771562163 | 3.6 VDC | 34.3 C | 14.7 % | 0 | 0 |
| 1771562087 | 3.6 VDC | 34.2 C | 14.79 % | 0 | 0 |
| 1771561808 | 3.62 VDC | 33.9 C | 15.19 % | 0 | 0 |
| 1771561689 | 3.63 VDC | 33.7 C | 15.35 % | 0 | 0 |
| 1771561629 | 3.63 VDC | 33.6 C | 15.45 % | 0 | 0 |
| 1771561490 | 3.63 VDC | 33.3 C | 15.73 % | 0 | 0 |
| 1771561443 | 3.65 VDC | 32.9 C | 15.87 % | 0 | 0 |
| 1771561196 | 3.66 VDC | 32.3 C | 16.46 % | 0 | 0 |
| 1771554236 | 3.69 VDC | 22.9 C | 19.93 % | 0 | 0 |
| 1771554140 | 3.69 VDC | 22.7 C | 18.79 % | 0 | 0 |
| 1771553866 | 3.7 VDC | 24.7 C | 17.27 % | 0 | 0 |
| 1771553843 | 3.7 VDC | 24.5 C | 17.07 % | 0 | 0 |
| 1771553809 | 3.72 VDC | 24.5 C | 17.07 % | 0 | 0 |
| 1771543051 | 3.89 VDC | 24.4 C | 17.19 % | 0 | 0 |
| 1771543025 | 3.89 VDC | 24.4 C | 17.19 % | 0 | 0 |
| 1771543002 | 3.9 VDC | 24 C | 17.84 % | 0 | 0 |
| 1771542961 | 3.9 VDC | 24 C | 17.84 % | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)