This is the latest recevied telemetry packets stored in our database for station/object F1MCO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771570127 | 0 Count | 26 Count | 0 Count | 0 VDC | 0 VDC |
| 1771568325 | 93 Count | 1009 Count | 1 Count | 0 VDC | 0 VDC |
| 1771566521 | 92 Count | 993 Count | 1 Count | 0 VDC | 0 VDC |
| 1771564718 | 91 Count | 972 Count | 1 Count | 0 VDC | 0 VDC |
| 1771562915 | 90 Count | 954 Count | 1 Count | 0 VDC | 0 VDC |
| 1771561111 | 89 Count | 936 Count | 1 Count | 0 VDC | 0 VDC |
| 1771559344 | 84 Count | 918 Count | 1 Count | 0 VDC | 0 VDC |
| 1771557541 | 83 Count | 897 Count | 1 Count | 0 VDC | 0 VDC |
| 1771553934 | 81 Count | 863 Count | 1 Count | 0 VDC | 0 VDC |
| 1771552131 | 80 Count | 845 Count | 1 Count | 0 VDC | 0 VDC |
| 1771550328 | 79 Count | 825 Count | 1 Count | 0 VDC | 0 VDC |
| 1771548525 | 78 Count | 806 Count | 1 Count | 0 VDC | 0 VDC |
| 1771546721 | 77 Count | 786 Count | 1 Count | 0 VDC | 0 VDC |
| 1771544918 | 76 Count | 767 Count | 1 Count | 0 VDC | 0 VDC |
| 1771543115 | 75 Count | 746 Count | 1 Count | 0 VDC | 0 VDC |
| 1771541312 | 74 Count | 723 Count | 1 Count | 0 VDC | 0 VDC |
| 1771539509 | 73 Count | 701 Count | 1 Count | 0 VDC | 0 VDC |
| 1771537741 | 68 Count | 687 Count | 1 Count | 0 VDC | 0 VDC |
| 1771535939 | 67 Count | 664 Count | 1 Count | 0 VDC | 0 VDC |
| 1771534135 | 66 Count | 644 Count | 1 Count | 0 VDC | 0 VDC |
| 1771532332 | 65 Count | 622 Count | 1 Count | 0 VDC | 0 VDC |
| 1771530528 | 64 Count | 599 Count | 1 Count | 0 VDC | 0 VDC |
| 1771528725 | 63 Count | 577 Count | 1 Count | 0 VDC | 0 VDC |
| 1771526922 | 62 Count | 555 Count | 1 Count | 0 VDC | 0 VDC |
| 1771525119 | 61 Count | 531 Count | 1 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)