This is the latest recevied telemetry packets stored in our database for station/object SP6ZWR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785097516 | 39.6 C | 11.97 % | 1008.5 hPa | 0 | 0 |
| 1785097394 | 39.6 C | 13.24 % | 1006.88 hPa | 0 | 0 |
| 1785097378 | 39.5 C | 13.34 % | 1008.75 hPa | 0 | 0 |
| 1785097325 | 39.5 C | 13.34 % | 1008.5 hPa | 0 | 0 |
| 1785097312 | 39.4 C | 13.38 % | 1005 hPa | 0 | 0 |
| 1785097299 | 39.4 C | 13.38 % | 1005.13 hPa | 0 | 0 |
| 1785097286 | 39.4 C | 13.38 % | 1006.13 hPa | 0 | 0 |
| 1785097273 | 39.4 C | 13.38 % | 1008.25 hPa | 0 | 0 |
| 1785097260 | 39.4 C | 12.85 % | 1005.63 hPa | 0 | 0 |
| 1785097247 | 39.4 C | 12.85 % | 1006.5 hPa | 0 | 0 |
| 1785097205 | 39.4 C | 12.85 % | 1010.5 hPa | 0 | 0 |
| 1785097144 | 39.3 C | 12.64 % | 1009.63 hPa | 0 | 0 |
| 1785097131 | 39.2 C | 13.1 % | 1015.88 hPa | 0 | 0 |
| 1785097114 | 39.2 C | 13.1 % | 1013.38 hPa | 0 | 0 |
| 1785096854 | 38.9 C | 13.03 % | 1004.88 hPa | 0 | 0 |
| 1785096582 | 38.3 C | 14.32 % | 1007.5 hPa | 0 | 0 |
| 1785096569 | 38.3 C | 14.32 % | 1007.5 hPa | 0 | 0 |
| 1785096556 | 38.3 C | 14.32 % | 1007 hPa | 0 | 0 |
| 1785096543 | 38.3 C | 14.32 % | 1006.75 hPa | 0 | 0 |
| 1785096510 | 38.2 C | 14.32 % | 1007 hPa | 0 | 0 |
| 1785096332 | 37.6 C | 16.31 % | 1006.38 hPa | 0 | 0 |
| 1785096261 | 37.5 C | 16.65 % | 1006.25 hPa | 0 | 0 |
| 1785096202 | 37.2 C | 16.06 % | 1008.38 hPa | 0 | 0 |
| 1785096176 | 37.2 C | 16.06 % | 1006.75 hPa | 0 | 0 |
| 1785096163 | 37.2 C | 16.06 % | 1006.75 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)