This is the latest recevied telemetry packets stored in our database for station/object F5UGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771571126 | 20 Count | 361 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1771569355 | 19 Count | 358 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1771567552 | 18 Count | 355 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1771565749 | 17 Count | 352 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1771563946 | 16 Count | 352 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1771562143 | 15 Count | 347 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1771560340 | 14 Count | 347 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1771558538 | 13 Count | 346 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1771556735 | 12 Count | 342 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1771554932 | 11 Count | 340 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1771553129 | 10 Count | 336 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1771551327 | 9 Count | 333 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1771549524 | 8 Count | 330 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1771547754 | 7 Count | 328 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1771545951 | 6 Count | 327 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1771544148 | 5 Count | 325 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1771542345 | 4 Count | 324 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1771540543 | 3 Count | 322 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1771538740 | 2 Count | 321 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1771536937 | 1 Count | 318 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1771535135 | 0 Count | 317 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1771533332 | 181 Count | 1569 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1771531529 | 180 Count | 615 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1771529726 | 179 Count | 612 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1771527923 | 178 Count | 609 Count | 0 Count | 4.21 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)