This is the latest recevied telemetry packets stored in our database for station/object EB7FBJ-18. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795360302 | 3.26 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1795357602 | 3.29 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1795354902 | 3.33 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1795352201 | 3.36 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1795349501 | 3.39 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1795346801 | 3.42 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1795344101 | 3.55 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1795341400 | 3.46 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1795338700 | 3.31 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1795336000 | 3.36 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795333300 | 3.29 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1795330599 | 3.33 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795327898 | 3.35 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1795325198 | 3.38 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795322498 | 3.39 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1795319798 | 3.41 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795317097 | 3.42 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795314397 | 3.42 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1795311697 | 3.45 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795308997 | 3.46 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795306296 | 3.48 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795303596 | 3.49 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795300896 | 3.49 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795298195 | 3.5 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1795295495 | 3.5 VDC | 0.76 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)