This is the latest recevied telemetry packets stored in our database for station/object EA5SW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762809599 | 0 Count | 347 Count | 0 Count | 0 VDC | 0 VDC |
| 1762807378 | 0 Count | 166 Count | 0 Count | 0 VDC | 0 VDC |
| 1762805158 | 0 Count | 1074 Count | 0 Count | 0 VDC | 0 VDC |
| 1762802938 | 0 Count | 950 Count | 0 Count | 0 VDC | 0 VDC |
| 1762800718 | 0 Count | 772 Count | 0 Count | 0 VDC | 0 VDC |
| 1762798498 | 0 Count | 603 Count | 0 Count | 0 VDC | 0 VDC |
| 1762796878 | 0 Count | 503 Count | 0 Count | 0 VDC | 0 VDC |
| 1762794658 | 0 Count | 341 Count | 0 Count | 0 VDC | 0 VDC |
| 1762792438 | 0 Count | 162 Count | 0 Count | 0 VDC | 0 VDC |
| 1762790218 | 0 Count | 1140 Count | 0 Count | 0 VDC | 0 VDC |
| 1762787998 | 0 Count | 972 Count | 0 Count | 0 VDC | 0 VDC |
| 1762785778 | 0 Count | 794 Count | 0 Count | 0 VDC | 0 VDC |
| 1762783558 | 0 Count | 613 Count | 0 Count | 0 VDC | 0 VDC |
| 1762781338 | 0 Count | 419 Count | 0 Count | 0 VDC | 0 VDC |
| 1762779118 | 0 Count | 275 Count | 0 Count | 0 VDC | 0 VDC |
| 1762776897 | 0 Count | 129 Count | 0 Count | 0 VDC | 0 VDC |
| 1762775278 | 0 Count | 1111 Count | 0 Count | 0 VDC | 0 VDC |
| 1762773057 | 0 Count | 953 Count | 0 Count | 0 VDC | 0 VDC |
| 1762770837 | 0 Count | 782 Count | 0 Count | 0 VDC | 0 VDC |
| 1762768617 | 0 Count | 616 Count | 0 Count | 0 VDC | 0 VDC |
| 1762766397 | 0 Count | 454 Count | 0 Count | 0 VDC | 0 VDC |
| 1762764177 | 0 Count | 277 Count | 0 Count | 0 VDC | 0 VDC |
| 1762761957 | 0 Count | 183 Count | 0 Count | 0 VDC | 0 VDC |
| 1762759737 | 0 Count | 95 Count | 0 Count | 0 VDC | 0 VDC |
| 1762757517 | 0 Count | 1099 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)